WATER SUCTION HOSE

WATER SUCTION HOSE

Item Code : 2482/1982

APPLICATION

Used for suction of water under

low pressure and finds its use in

irrigation, dam projects,

agriculture, Excavation of mines

and dewatering operations of

general nature.

CONSTRUCTION

Lining :	Natural rubber compound free from air blisters, porosity or any other visible defects.
Reinforcement :	Natural or Synthetic fabric or a combination thereof with a helical GS wire embedded between the reinforcement plies in case of smooth bore and internal in case of rough bore.
Cover :	Corrugated, cloth-marked finish outer cover made from natural rubber compound resistant to abrasion and weather.
End Connection :	End hose length has soft ends for clamping or can be supplied with built in nipples and flanges on request.
Temperature :	-40^oF to +158^oF
Length :	Upto 100mm X 15 meters. Above 100mm X 7.50 meters

Technical Specification :

Nominal Bore in mm	Tolerance on Nominal bore in mm	Thickness of lining mm	Thickness of cover mm	Thickness of filter mm	Number of reinforcement plies	Working Pressure kgf/cm²	^{Thickness of wire mm}
25.0	±1.5	1.5	1.0	1.0	3	2.0	2.00
31.5	±1.5	1.5	1.5	1.0	3	2.0	2.00
38.0	±1.5	1.5	1.5	1.0	3	2.0	2.00
45.0	±1.5	1.5	1.5	1.0	3	1.5	2.50
50.0	±1.5	2.0	1.5	1.0	3	1.5	2.50
56.0	±1.5	2.0	1.5	1.0	3	1.5	2.50
63.0	±1.5	2.0	1.5	1.0	3	1.5	2.50
75.0	±2.0	2.5	1.5	1.0	4	1.0	3.15
100.0	±2.0	2.5	1.5	1.5	4	1.0	3.15
125.0	±2.0	2.5	1.5	1.5	5	1.0	3.15
150.0	±2.0	2.5	1.5	1.5	5	1.0	4.00
200.0	±3.0	3.0	2.0	2.0	6	1.0	4.00
250.0	±3.0	3.0	2.0	2.0	6	1.0	4.00

The size of length up to 100 mm is 18 meters as against conventional 15 meters, 15 meters up to 150 mm and 7.5 meters up to 250 mm

Home Contact Us Webmaster